DOCK PLATES AND DRAWBRIDGE DOCK LEVELLERS
Today, selecting the right dock leveller for your facility can be more complicated than ever. Truck designs are changing, productivity is critical and safety is becoming a bigger issue at loading docks. Many warehouses and stores have open loading docks for rear and side loading of their vehicles. The dock plates and drawbridge dock levellers can be applied for handling palletized and non-palletized loads. The product range consists of stationary and movable designs with different service ranges, dimensions and capacities to fully meet your specific requirements.
|
|
 |
Aluminium Dock Plate
Model CMA-B 3060
The aluminium dock plate model CMA-B 3060 is an universal solution to bridge the gap between open loading dock and vehicle. Available in a variety of dimensions to meet your specific application.
This dock plate can be transported to another location manually or by using the transport car, rollers (fitted to the side of the platform) or fork- lift truck (pockets integrated within the platform).
| 
Aluminium dock plate model CMA-B 3060
|
Aluminium Dock Plate
Model CAB-M 3070
The aluminium dock plate model CAB-M 3070 is an universal solution to load and unload vehicles with a hand pallet truck, roll container, stack car, etc. Available in a variety of dimensions to meet your specific application.
The design features include a fixed lip with hold-up plate (contact with vehicle), fixed lip (positioned on loading dock) and an aluminium anti-slip platform with integrated pockets.
| 
Aluminium dock plate model CAB-M 3070
|
Aluminium Drawbridge Dock Leveller
Model CSKB-S 3100
The aluminium drawbridge dock leveller model CSKB-S 3100 is easy to operate and movable to allow easy adjustment when vehicles are parked at the open loading dock.
This model is designed to service vehicles with a moderate difference in bed heights and can also be applied inside the building to provide an optimum insulated loading dock.
| 
Aluminium drawbridge dock leveller model CSKB-S 3100
|
Aluminium Drawbridge Dock Leveller
Model CSKB-S 3400 (Stationary Unit)
Model CSKB-V 3400 (Movable Unit)
The aluminium drawbridge dock leveller model CSKB-S 3400 is a stationary unit and model CSKB-V 3400 is a movable unit, both are very easy to operate. These models are designed to service vehicles with difference in bed heights of up to 200 mm.
The design features include a fixed lip (contact with vehicle), an aluminium anti-slip platform, operating handle, automatic free fall protection in the vertical stored position and spring assist system.
| 
Aluminium drawbridge dock leveller model CSKB-S 3400 (stationary unit)
|
Spring Assisted Drawbridge Dock Leveller
Model CMSB-S 7500
The spring assisted drawbridge dock leveller model CMSB-S 7500 is a stationary unit which is available in steel, zinc-plated steel and aluminium. This model is designed with capacities of up to 60 kN and services vehicles with difference in bed heights of up to 300 mm.
The spring assist system ensures reliability and easy operation. The design features include a fixed lip or aluminium segmented lip, a steel or aluminium anti-slip platform, operating handle, automatic free fall protection in the vertical stored position and spring assist system.
| 
Spring assisted drawbridge dock leveller model CMSB-S 7500 (aluminium unit)
|
Spring Assisted Drawbridge Dock Leveller
Model CMSB-V 7550
The spring assisted drawbridge dock leveller model CMSB-V 7550 is a movable unit for easy adjustment when vehicles are parked at the open loading dock. Available in steel, zinc-plated steel and aluminium. This model is designed with capacities of up to 60 kN and services vehicles with difference in bed heights of up to 300 mm.
The trolley and bearing system enables easy movement. The spring assist system ensures reliability and easy operation. The design features include a fixed lip or aluminium segmented lip, a steel or aluminium anti-slip platform, operating handle, automatic free fall protection in the vertical stored position and spring assist system.
| 
Spring assisted drawbridge dock leveller model CMSB-V 7550 (steel unit)
|
Edge-O-Dock Drawbridge Dock Leveller
Model CMEB-S 7700
The drawbridge dock leveller model CMEB-S 7700 is a stationary unit and is ergonomically easy to operate. This model is ideal for servicing vehicles with minimal height difference or where space is a problem.
This model saves time and space by eliminating the need to store, find and move portable plates to correct dock positions. Easy replacement with a unique rear hinge design allows for the lip-deck section to be unpinned from the faceplate and replaced with any capacity or length.
| 
Edge-O-Dock drawbridge dock leveller model CMEB-S 7700
|